P360 & P360EX Portable LED Light User Manual
Table of Contents What’s In The Box 1 Getting To Know The Light 2 Set Up And Basic Operation 4 Optional Accessories 7 Specifications 8 For Your Safety 9
What’s In The Box • P360 or P360EX Light • 4 Leaf Barndoor • Power Adapter 1
Getting To Know The Light E F D C G H L I M J N O K 2
A 4 Leaf Barndoor B Barndoor Slot C Barndoor Holder D Barndoor Fix Ball E Side Air Vents F Yoke Knob G Back Air Vents H Light Intensity Knob I Light Control Output Jack (P360EX Only) J DC Power Input Jack K On/ Off Switch L CCT Tuning Knob (3000K - 5600K) M Light Control Input Jack (P360EX Only) N Yoke O Light Stand Adapter 3
Set Up And Basic Operation 7 6 11 3 5 2 4
8 11 10 13 12 9 5
1 When using light for the first time, remove the plastic protective membranes and discard. 2 Mount Light Stand Adapter(O) to 5/8 Stud on light stand or tripod. 3 Insert the DC power plug from the power adapter into the DC Power Input Jack (J). 4 Connect the Power Adapter to AC Power. 5 Press On/Off button (K) to turn on P360/EX. 6 Adjust the color temperature with CCT Tuning Knob (L). 7 Adjust the Intensity with the Light Intensity Knob (H).
Optional Accessories Fresnel Lens Dome Diffuser D-tap Cable Softbox For P360EX Only Power Adapter Holder DMX Connection Box For additional accessories go to www.fiilex.
Specifications Size (without Barndoor) 4” (Diameter) x 4.7” (Length) / 102mm (Diameter) x 119mm (Length) Weight (Includes Yoke) 1.6 lb / 0.74 kg LED Dense Matrix LED Thermal Design Advanced Vapor Cooling System CCT Range Continuous from 3000K to 5600K CRI >92 Power Consumption 90W Max. Power Input 12 to 28 V DC AC Adapter 100-240V AC, 50/60Hz (In) / 24V DC , 90W max.
For Your Safety • Do not attempt to disassemble the body of the P360 or P360EX, doing so will immediately void the factory warranty. • Do not install the P360 in a damp or wet area. • Do not submerge P360/P360EX in water. • Do not cover the side or back air vents. • Only use the included power adapter, failure to do so may cause damage to the LED light. • Only use a soft, dry towel to gently clean the exterior of the light. • Before using the light for the first time, remove the protective membranes.
Fiilex.