P200 FlexJet User Manual
Table of Contents What’s In The Box 1 Getting To Know The Light 2 Set Up And Basic Operation 4 Specifications 6 For Your Safety 7 Warranty 8
What’s In The Box • P200 FlexJet • Power Supply • Fiber Adapter • User Manual 1
Getting To Know The Light F E D C B A F H G I K J L M 2
A Fiber Adapter B Protective Cap C LED Source/ Fiber Mounting Hole D Release Button for Fiber Adaptor E Air Vents F Yoke Knob G Color Selection Knob H Intensity Knob I On/ Off Switch J Hand Holder K DC Power Input Jack L Yoke M Light Stand Adapter 3
Set Up And Basic Operation 8 7 6 5 4 1 4
2 3 1 Mount Light Stand Adapter(M) to spigot on light stand or tripod. 2 Insert Fiber into Fiber Mounting Hole (C) . 3 Slightly rotate until clicking into place. 4 Insert the DC power plug into P200 FlexJet DC Power Input Jack (K). 5 Press On/Off Switch (I) to turn on P200 FlexJet. 6 Tighten Yoke Knob (F) to lock the P200 FlexJet in place. 7 Use the Color Selection Knob (G) to set the P200 FlexJet to a desired color. 8 Adjust the Intensity with Intensity Knob (H).
Specifications 4” (Diameter) x 7.8” (Length) Size Weight (Includes Yoke) 2.8 lb / 1.29 kg Dense Matrix LED LED Advanced Vapor Cooling System Thermal Design 3000K White/4300K White/5600K White Color Selections Magenta/Yellow/Aqua/Cyan/Blue >90 CRI (for Whites) 60W Max. Power Consumption 12 to 28 V DC Input 100-240V AC, 50/60Hz (In) / 24V DC , 90W max.
For Your Safety • Do not attempt to disassemble the body of P200 FlexJet. • Do not install P200 FlexJet in a damp or wet area. • Do not cover the side and back air vents. • Use only the included power supply. Failure to do so may cause damage to the LED light. • Use only a soft, dry towel to gently clean the exterior of the light. • Before turning on the power, please make sure the Protective Cap (B) and protective membranes are removed.
2 Year Limited Warranty Unless otherwise stated, your product is covered by a two year parts and labor limited warranty. Fiilex guarantees, to the original buyer, all of its products to be free from defects in both workmanship and material for a period of two years from the date of purchase. This warranty extends to all products which have proved defective through normal use but excludes products that have been disassembled, modified or misused by the buyer or any other person.
Any Product unit or part returned to Fiilex must be packaged in a suitable manner to ensure the protection of such Product unit or parts. The package must be clearly and prominently marked to indicate that the package contains returned Product units or parts with a Return Authorization (RA#) number. All returned Product units or parts must be accompanied by a written explanation of the alleged problem or malfunction. Fiilex.com 1689 Regatta Blvd, Richmond, CA 9480 (510)620-5154. fiilex@fiilex.
Fiilex.