Instructions / Assembly

2 / 2
4/24/2018
4. Fasten the white fixture lead wire to the white wire in the outlet box.
Fasten the wires together with an approved fastener (wire nut).
Starting about 1” below the fastener, tightly wrap the connection
With electrical tape so that the connection seals the end of the fastener.
WARNING
Make sure that there is no exposed wire or strands that
could cause a dangerous short circuit!
5. Connect the black fixture lead wire to the black wire in the outlet box.
Fasten the joined wires as in step 4.
6. Using the two ball nuts to fasten the fixture back plate to the outlet box.
7. Install the lamps (light bulbs).not included
NOTE: This fixture is rated for Max 60 watt type B lamp. Can patible with LED light bulbs Dimmable
WARNING
DO NOT EXCEED RECOMMENDED WATTAGE!
8. Install the glass shade, put the roof over the glass shade then fasten in with the long screw and finial
9. Restore power to circuit at breaker or fuse box.
electrical tape
approved fastener
(
wire nut
)