Instructions / Assembly

5
AA
4
Pre-Installation (continued)
PACKAGE CONTENTS
Part Description Quantity
A Fixture 1
Installation
1
Attaching the cross bar to the
outlet box
Attaching the chain
□ Remove chain (EE), ring (DD) and screw collar loop (CC)
from preassembled threaded nipple on cross bar (AA).
□ Mount the cross bar (AA) to the outlet box using the two
outlet box screws (BB).
□ Attach screw collar loop (CC) to the threaded nipple of
cross bar (AA). Choose the desired length of chain (EE), using a
soft cloth and pliers (none included) to avoid damaging the nish
of chain (EE) if any links are being removed.
□ Open the top section of the chain (EE) and attach it to the screw
collar loop (CC). Pass the chain (EE) through canopy (FF) and
ring (DD).
□ Then weave the xture wire and the xture ground wire from
xture (A) through the chain (EE), ring (DD), canopy (FF), screw
collar loop (CC) and the threaded nipple on cross bar (AA).
□ Wrap the ground wire from the xture around the ground
screw (HH) on the cross bar (AA). Connect the ground wire
from the xture to the ground wire from the outlet box.
□ Connect the smooth wire (marked) from xture to the black
supply wire.
□ Connect the ridged wire (unmarked) from xture to the white
supply wire.
□ Cover the three connections using the three wire
connectors (GG). Wrap the three wire connections with
electrical tape for a more secure connection.
□ Position the wires back inside the outlet box.
2
3
Connecting the electrical wires
A
BB
AA
CC
FF
DD
EE
NOTE: The top and bottom section of chain (EE) are
required.
GG
HH
AA