Instructions / Assembly

Assembly
1 Assembling the light fixture
□ Carefully unpack the fixture, lay out all parts
on clean surface.
□ Unscrew and remove the four small ball
finials (C) from the fixture body (B).
□ Place the glass shade (D) into the metal ring
(E).
□ Secure the fixture body (B) to the metal ring
(E) with the four small ball finials (C) that were
removed above.
□ Install three 60-watt max. medium base type
A15 bulbs (not included) into the sockets, use
frosted bulbs for best results.
5
2 Preparing the light fixture to hang
□ Screw the chain loop (A) to top of the fixture body
(B).
□ Using a soft cloth and chain pliers or pliers with a
screwdriver (see below) to open one link of chain
(JJ) to get the desired height, remove the excess
links of chain (JJ), attach the bottom section to the
end link of chain (JJ) and chain loop (A).
□ Thread the fixture and copper ground wires up
through every other link in the chain (JJ).
TO OPEN A CHAIN LINK
Use a pair of pliers and a screwdriver as shown
above to open a chain link. Wrap the jaws of the
pliers with cloth to protect the finish of the chain.
NOTE: Use three 60-watt max. medium-base A15 bulbs
or three 13-watt max. medium-base CFL bulbs.
B
C
D
E
A
JJ
B
NOTE: The top and bottom section of chain (JJ) are
required.
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.