Manual

13.Positionsideburnerbaseassemblyontorightsidemountingbracketasshownin the sequence illustrated below.
Shelf Assembly
Brackets on burner base assembly fit
"inside" mounting bracket.
IMPORTANT: Flange on burner base should go over the flange
on the mounting bracket as shown. Mounting
bracket flange is "sandwiched" between burner base
and burner base brackets
NOTE: Insta!l carriage bolts here first
(front and back) when mounting assembly
to mounting bracket.
Shelf
Shelf Bracket
Mounting Bracket
14. Attach right hand shelf assembly with (4) I/4=20 x 3/4" carriage bolts and four tapered wing nuts, inserting
carriage bolts into mounting bracket assembly first then proceeding to remaining bolts.
Mounting bracket located on leg assembly.
\
15. Repeat attachment procedure described in
steps 13 and 14 for left hand shelf assembly.
1,4" - 20 X 3/4" Carriage Bo_t 114"-20 Tapered Wingnut
13