User Manual

Input signal selection is " DVR " (video signal) channel,
2.2 Recording start
screen will display is “RF” channel on the screen,
press the " REC / OK
button and a symbol will appear as a red flashing
,
recording begins , the DVR defaults to the RF channel,
if you would like to
“VIDEO” channel, press the
to switch
cannot record). You want to stop the video, press " REC / OK " button.
2.3 Video playback:
Press " MODE " button and at the top left appears a symbol,
you can use
package, select and press the "REC / OK" button to
button to select the playback
2.4 Screen shot
(
SC.SHOT function) :
SC.SHOT under VIDEO or RF, Press the “SC.SHOT”,
to store real-time images (make sure your SD card is inserted.)
If you want to review these images, press “ MODE ” to enter the
/
”
to select the
folder to see them.
" / " keys to go forward or backward also to select
confirm. Playback with the " "
the playback file
" "
speed, fast forward with key.
playback menu, then use “
the monitor
"
meaning that
Record
(HDMI input
10