User Manual

2.2 Auto Search:
Turn on the monitor, press “MENU” and select “RF” signal input.
the top left corner of the screen. When the screen on the
/CH/
search has finished.
2.3 Manual Searching and setting:
Turn on the monitor, press “ MENU” and select “RF” signal
input. “BAND:X CH:X” will display on the top left corner of the
screen Press “
/BAND
” to switch channel A/B/E/F. Press
” ,“Auto Searching” will display on
Long press “
upper left corner shows the BAND:X CH:X and images, the
9
the signal sent from the transmitter and display it on the monitor.
“ ” to select 1~8 channel. The receiver will receive
/CH/