32 Channel Auto Searching Wireless FPV LCD Monitor with Diversity Receiver User Manual
Product description: Super Slim, Wireless FPV monitor with dual receiver. LCD monitor is a new multi-function product, adopting advanced integrated circuits and high-quality new HD LCD monitor. It integrates a high-sensitivity and auto searching of 32channels, dual 5.8GHZ AV wireless receivers, aerial receiver and high-definition monitor.
Product features : 1.8cm thick body Build-in 5.8 GHz wireless receiver High Sensitivity:-90dBM, 5.8GHz wireless receiver, 32 channels Auto search Non-blue screen High brightness, contrast, high resolution Built-in VIDEO/AUDIO input and output, HDMI input, Color Control Systems Headphone audio Built-in battery and rear battery plate. With VIDEO signal output function, can be used as video host, connecting multiple monitors. Shortcuts key can adjust the brightness and check field.
CONTENTS 1. Product description ------------------------------- 4 2. Wireless receiver operation -------------------- 7 3. Operation instructions --------------------------- 10 4. VIDEO input and output cable ------------------ 15 5. Sun shade installation and removal ---- 15 6. Power Supply------------------------------------------ 18 7. Parameters -------------------------------------------- 19 8.
1. Product description 1.
1. /CH/ : Multi button: Check Field/ Auto search/ Channel set/ up. In RF signal state: Press this button for channel selection In HDMI / VIDEO state: shortcut key for check field. In OSD menu state: UP for OSD Menu. 2. /BAND : Multi button brightness election/ chanel set / dowm. In RF signal state: Press this button for channel selection from “AB E F” In OSD for “DOWN” button. In HDMI / VIDEO signal state: press this button to adjust brightness. In OSD menu state: Down for OSD menu. 3.
9. TFT screen 10. Terminal of receiver 1.2 Rear battery plate instruction: 5 1 6 7 2 8 3 4 1. USB Upgrade 2. DC OUT: DC power output. Can supply power to other additional equipment. When the machine has an external power supply, the output of the power supply voltage and the external power supply voltage is the same. If is powered by the built-in battery, the battery voltage of output supply will be same as the built-in battery voltage.
3. DC IN: External power input. This machine can be powered by external or internal power. If you want to use another power adapter, please use a genuine power supply in the DC9-18V, ≧1.2A. Range. 4. Battery plate 5. ：Stereo earphone jack 6. AV/OUT: AUDIO output port 7. AV/IN: AUDIO input port 8. HDMI IN: HDMI input port 2.
2.1 Channel selection: Wireless transmitter channel and receiver channel must be the same as the chart; otherwise it will not receive a signal. This unit can auto search 32 channels. (Frequency range of each region is different, please check the unit’s frequency chart below). Wireless 5.
2.2 Auto Search: Turn on the monitor, press “MENU” and select “RF” signal input. Long press “ /CH/ ” ,“Auto Searching” will display on the top left corner of the screen. When the screen on the upper left corner shows the BAND:X CH:X and images, the search has finished. 2.3 Manual Searching and setting: Turn on the monitor, press “ MENU” and select “RF” signal input. “BAND:X CH:X” will display on the top left corner of the screen Press “ /BAND ” to switch channel A/B/E/F.
3. Operating instructions 3.1 Button instructions: Standby button MODE Input Signal selection button menu item selection for settings adjustment Volume down and center mark button press this key for center mark on/off. If would like to make the Volume down, press “ ” firstly and then press this button for adjustment. Menu item selection for settings adjustment.
Multi button /BAND different functions in different input status: ● RF Status Manual Tuning, to switch channel A/B/E/F. ● VIDEO Status No menu shows, press this button to change 6 brightness levels 2 Menu instructions Press "MENU" to enter the menu, use the " /CH/ " or "/BAND" button to select "Color press " " or " " MENU Function Volume", select it and button to confirm, enter the submenu Operation, use the " /CH/ " or " /BAND" button select the adjustment item.
Color ※ Brightness: To adjust the image's brightness. ※ Contrast: To adjust the brightnest ratio of the Image. ※ Hue : On NTSC Video mode, the image color tint difference is adjustable by hue.
※ Language: Languages for OSD as below: English 、 Español、 、François、Italia no、Deutsch 、 한국의 、Pycc 、Portuguesa ※ H Position：To adjust the OSD horizontal position. ※ V Position：To adjust the OSD in vertical position. ※ OSD Timeout：To adjust the clock. ※ Transparent：To adjust the level of transparency. Function 13 ● Reset: Back to original setting. ● System: To adjust color video format, PAL/NTSC.
※ Display Ratio: To change the display ratio 16:9/4:3. ● Screen Markers: To adjust screen marker（off，96%， 93%，90%，85%，80%） ● Centre Markers：To set centre mark (cross mark) display ● Camera: Use the Canon 5 d II or similar camera, the monitor video has a real-time image. NO black screen, NO delay. Sound ※ Volume : To adjust the volume.
※ Focus: As an auxiliary function (in HDMI mode ) when used as the camera viewfinder. ※ Ver.1.1: Software version number 4. VIDEO input and output cable 1 4 3 2 3.5mm plug for VIDEO input and output. (see the picture as above) Use No.
5. Sun shade installation and removeal ● Sun shade installation view ① The sun shade’s hanging clip and the monitor’s sun shade slot should be aligned with the hole and slide down. ② Please follow the above steps, otherwise the cover will be damaged.
5.2 Remove: When you want to remove the shade cover from the monitor, drag up shade cover from monitor, that separates the sun shade from the monitor.
6. Power Supply 6.1 There are two versions for power supply: ● External power supply Supply by power adapter When the monitor is connect by the DC power adapter, red light is illuminated, means is charging, after it is fully charged, then it will switch to a green light. To use a power adapter supply, choose the power adapter(optional) , which matches the monitor. If using another power adapter, please use a power supply in the DC9-18V, ≧ 1.5A Range.
6.3 Li-ion Battery: ● The working temperature of Li-ion battery is -20~60℃, please don’t use the battery in places with temperatures too low or to high. The power of battery will be reduced if it is working in a low temperature environment. Please don’t use the battery in high temperature environment, may cause battery swell and catch fire. Please check the temperature of battery when working in high temperature environment.
Backlight Dot pitch Display ratio Brightness IPS 0.05(W) x 0.15 (H) 16:9 600 cd/ m Contrast ratio 800:1 Response time 10ms Viewing angle Input signal Output signal Video color system HDMI support format 2 80°/85°(L/R) 85°/85°(U/D) Video/Audio/RF/HDMI Video PAL-4.43 / NTSC-3.58 480i /480p /576i /576p 720p /1080i /1080p (50/60Hz) Headphone output stereo 3.5mm Input voltage DC:9~18V Power consumption RF receiving frequency ≦13W 5.
F re q u en c y s ta bi lity ± 10 0 p pm Unit size (mm) 190(L)x134(W)x18(H)mm Unit weight 440g (Including the Li battery but without antenna and battery plate) Installation method 1/4 inch bracket screw holes, can be easily connected to the hot shoe mount, tripod fixed installation Build-in battery Li-ion 7.4V/2200 mA/h Working temperature －20～50℃ Storage temperature －30～65℃ 8. Trouble shooting 8.
8.2 NO picture after Turning on the power ① Check signal cable contact are in good condition, a monitor is synchronized with the input signal, and can press the "SOURCE/EXIT" give it a try. If in the RF channel, please check to see if the transmitter has been work. ② Check signal cable connecting, and make sure use the standard adapter connect the monitor. If power supply by battery, please check the battery whether fully charged. 8.
