User Guide
FS-8700-127 Hanning & Kahl HCS-R Manual          Page 6 of 17 
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.FieldServer.com 
Tel: 408 262-2299 Fax: 408-262-2269 Toll_Free: 888-509-1970 email: support@FieldServer.com 
4.  Configuring the FieldServer as a HCS-R Client 
For  a  detailed  discussion  on  FieldServer  configuration,  please  refer  to  the  FieldServer 
Configuration Manual.  The information that follows describes how to expand upon the factory 
defaults provided in the configuration files included with the FieldServer (See “.csv” sample files 
provided with the FieldServer). 
This section documents and describes the parameters necessary for configuring the FieldServer 
to communicate with a HCS-R Server. 
4.1.  Data Arrays/Descriptors 
The  configuration  file  tells  the FieldServer  about its  interfaces, and  the  routing of  data 
required.    In  order  to  enable  the  FieldServer  for  HCS-R  communications,  the  driver 
independent FieldServer buffers  need to be  declared in  the “Data Arrays” section, the 
destination device addresses need  to  be declared  in the  “Client Side Nodes”  section,  and 
the data required from the servers needs to be mapped in the “Client Side Map Descriptors” 
section. Details on how to do this can be found below. 
Note that in the tables, * indicates an optional parameter, with the bold legal value being the 
default. 
Section Title 
Data_Arrays 
Column Title  Function  Legal Values 
Data_Array_Name  Provide name for Data Array 
Up  to  15  alphanumeric 
characters 
Data_Array_Format 
Provide  data format.  Each Data  Array can 
only take on one format. 
Float,  Bit,  UInt16,  SInt16, 
Byte, 
Data_Array_Length 
Number  of  Data Objects. Must be  larger 
than the data storage area required by the 
Map Descriptors for  the  data  being  placed 
in this array. 
1-10,000 
Example 
// Data Arrays     
Data_Arrays     
Data_Array_Name,  Data_Array_Format,  Data_Array_Length 
DA_CURRENT,  Uint16,  22 
DI_FromLoop01,  Bit,  22 
DI_OnLoop01,  Bit,  22 
DI_FromLoop02,  Bit,  22 
DI_OnLoop02,  Bit,  22 
DI_FromLoop03,  Bit,  22 
DI_OnLoop03,  Bit,  22 
DI_FromLoop014  Bit,  22 
DI_OnLoop04,  Bit,  22 










