User Guide

FS-8700-88 Envirotronics SystemsPlus Page 16 of 49
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: [phone] Fax: [phone] Toll_Free: 888-509-1970 email: [e-mail]
4.4.23. Map Descriptor Example 20 - set start time enabled = Boolean
// Client Side Map Descriptors
Map Descriptor
Map_Descriptor_Name, Data_Array_Name, Data_Array_Offset, Function, Node_Name, SysPlus_Data_Type, Length
Start_Time_Ena, Start_Time_Ena_0, 0, wrbx, SYSPLUS_01, Start_Time_Ena, 1
A Boolean value of 1 for “Enabled” or 0 for “Disabled” must be written to Data_Array_Name at Data_Array_Offset to trigger this
command.
4.4.24. Map Descriptor Example 21 - read stop time enabled
// Client Side Map Descriptors
Map Descriptor
Map_Descriptor_Name, Scan_Interval, Data_Array_Name, Data_Array_Offset, Function, Node_Name, SysPlus_Data_Type, Length
Stop_Time_Ena, 0s, Stop_Time_Ena, 0, rdbc, SYSPLUS_01, Stop_Time_Ena, 1
The stop time enabled status will be stored as 1 for “Enabled” or 0 for “Disabled” in Data_Array_Name at Data_Array_Offset.
4.4.25. Map Descriptor Example 22 - set stop time enabled = Boolean
// Client Side Map Descriptors
Map Descriptor
Map_Descriptor_Name, Data_Array_Name, Data_Array_Offset, Function, Node_Name, SysPlus_Data_Type, Length
Stop_Time_Ena, Stop_Time_Ena_0, 0, wrbx, SYSPLUS_01, Stop_Time_Ena, 1
A Boolean value of 1 for “Enabled” or 0 for “Disabled” must be written to Data_Array_Name at Data_Array_Offset to trigger this
command.