User Guide

FS-8700-88 Envirotronics SystemsPlus Page 15 of 49
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: [phone] Fax: [phone] Toll_Free: 888-509-1970 email: [e-mail]
4.4.19. Map Descriptor Example 16 - read remaining step time
// Client Side Map Descriptors
Map Descriptor
Map_Descriptor_Name, Scan_Interval, Data_Array_Name, Data_Array_Offset, Function, Node_Name, SysPlus_Data_Type, Length
Rm_Stp_Tm, 0s, Rem_Steptime, 0, rdbc, SYSPLUS_01, Rem_Step_Tim, 3
The retrieved remaining step time will be stored as follows in Data_Array_Name:
Offset from Data_Array_Offset Description
0 Hour
1 Minute
2 Second
4.4.20. Map Descriptor Example 17 -read start step
// Client Side Map Descriptors
Map Descriptor
Map_Descriptor_Name, Scan_Interval, Data_Array_Name, Data_Array_Offset, Function, Node_Name, SysPlus_Data_Type, Length
Start_Step, 0s, Start_Step, 0, rdbc, SYSPLUS_01, Start_Step, 1
4.4.21. Map Descriptor Example 18 - set start step = step_num
// Client Side Map Descriptors
Map Descriptor
Map_Descriptor_Name, Data_Array_Name, Data_Array_Offset, Function, Node_Name, SysPlus_Data_Type, Length
Start_Step, Start_Step_0, 0, wrbx, SYSPLUS_01, Start_Step, 1
The step_num must be written into Data_Array_Name at Data_Array_Offset to trigger this command.
4.4.22. Map Descriptor Example 19 - read start time enabled
// Client Side Map Descriptors
Map Descriptor
Map_Descriptor_Name, Scan_Interval, Data_Array_Name, Data_Array_Offset, Function, Node_Name, SysPlus_Data_Type, Length
Start_Time_Ena, 0s, Start_Time_Ena, 0, rdbc, SYSPLUS_01, Start_Time_Ena, 1
The start time enabled status will be stored as 1 for “Enabled” or 0 for “Disabled” in Data_Array_Name at Data_Array_Offset.