User Guide

FS-8700-86 Carrier DataPort Page 4 of 32
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: [phone] Fax: [phone] Toll Free: [phone] email: [e-mail]
3. Hardware Connections
The FieldServer is connected to the Carrier DataPort device as shown below.
Configure the DataPort Device according to manufacturer’s instructions. This driver requires that the
DataPort device’s DTPCONFIG table has been configured prior to connection with a FieldServer. In
addition, consult the manufacturer’s information on connecting Carrier Device’s to CCN network.
Note: Typical connections are 9600,N,8,1.