User Guide

FS-8700-86 Carrier DataPort Page 18 of 32
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: [phone] Fax: [phone] Toll Free: [phone] email: [e-mail]
This example illustrates how to make a Map Descriptor which reads a table and dumps the response in ASCII format to the error log. The error log can be dumped to a file on your computer using RUIDEBUG (a utility supplied with your FieldServer)
Data_Arrays Data_Array_Name,
Data_Format, Data_Array_Length
DA_DUMP, BYTE, 2000 Map Descriptors Map_Descriptor_Name,
Data_Array_Name,
Data_Array_Offset, Function, Node_Name, Length, Scan_Interval, Storet_As
Md1 , Da_Dump , 0 , rdbc , FAN01 , 1000 , 5.0s , AsciiLog The following fragment from the error log is typical of the response to a Map Descriptor like the one above.
T01> ASCII Dump Requested for MD=<MapDesc1> T01> Field1 99.0 000 000 Desc1 1 1 T01> Field2 98.0 000 000 Desc2222222 T01> Field3 on 000 000 33333 33333 3 T01> Field4 Off 000 000 44444444444444 T01> Field5 Off 000 000 5555 55555555 T01> Field6 Off 000 000 6666666666666 T01> Field7 Off 000 000 7 T01> Field8 Off 000 000 888 888 88888 T01> Field9 Off 000 000 99999999999 3 T01> Fielda DIRTY 000 000 aaaaaaaaaaaaa T01> Fieldb 0.0 000 000 bbbb T01> Fieldc Off 000 000 c T01> Fieldd -1.0 000 000 ddddddddddddd