Technologies Computer Driver Instruction Manual

ManualsBrandsFieldServer ManualsComputer HardwareFS-8700-84

A Sierra Monitor Company

APPLICABILITY & EFFECTIVITY

Effective for all systems manufactured after May 1, 2001

Driver Manual

(Supplement to the FieldServer Instruction Manual)

FS-8700-84 Lutron eLumen

Summary of content (39 pages)

PAGE 1
A Sierra Monitor Company Driver Manual (Supplement to the FieldServer Instruction Manual) FS-8700-84 Lutron eLumen APPLICABILITY & EFFECTIVITY Effective for all systems manufactured after May 1, 2001
PAGE 2
FS-8700-84_Lutron_eLumen Manual Table of Contents TABLE OF CONTENTS 1. Lutron eLumen Description .......................................................................................... 1 2. Driver Scope of Supply................................................................................................... 2 1.01 Supplied by FieldServer Technologies for this driver ............................................ 2 1.02 Provided by the Supplier of 3rd Party Equipment ................................
PAGE 3
FS-8700-84_Lutron_eLumen Manual Table of Contents 4.1.26. System Control Commands containing no Parameters: Toggle system variable value ....................................................................................................................... 20 4.1.27. System Control Commands containing no Parameters: Output temp scene 21 4.1.28. System Control Commands containing no Parameters: Select scene in area 22 4.1.29. System Control Commands containing no Parameters: Timeclock new schedule 23 4.1.
PAGE 4
FS-8700-84_Lutron_eLumen Driver Manual 1. Page 1 of 36 Lutron eLumen Description The Serial Lutron eLumen driver allows the FieldServer to transfer data to and from devices over RS-232 or RS-485 using eLumen protocol. The FieldServer can only be used operationally as a Lutron Client driver. Any existing Lutron Server drivers are for FieldServer testing purposes only and cannot be used to emulate a Lutron eLumen system. The driver supports the following 3 panels: GRAFIK5000, GRAFIK6000 and GRAFIK7000.
PAGE 5
FS-8700-84_Lutron_eLumen Driver Manual 2. Page 2 of 36 Driver Scope of Supply 1.01 Supplied by FieldServer Technologies for this driver FieldServer Technologies PART # FS-8915-10 FS-8917-02 FS-8700-84 Description UTP cable (7 foot) for RS-232 use RJ45 to DB9F connector adapter Driver Manual. Provided by the Supplier of 3rd Party Equipment 1.02 2.1.1. Part # Required 3rd Party Hardware Description Lutron Panel FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.
PAGE 6
FS-8700-84_Lutron_eLumen Driver Manual 3. Page 3 of 36 Hardware Connections The FieldServer is connected to the Lutron eLumen as shown in connection drawing.
PAGE 7
FS-8700-84_Lutron_eLumen Driver Manual 120V 15A Dedicated Control Feed Page 4 of 36 Wallstation link To control stations eLumen Processor Aux Link (RS-485) User Interface link Dimmer panel link To dimmer panels Inter-processor link Power OK Serial Tx Rx EIA232 Tx Rx Ethernet - USB + EIA485 FS-B2010 (408)-262-2299 LUTRON ELUMEN RS-485 CONNECTION DIAGRAM BASE NAME: FILE NAME: FS-T28700-84 .
PAGE 8
FS-8700-84_Lutron_eLumen Driver Manual 4. Page 5 of 36 Configuring the FieldServer as a Lutron eLumen Client For a detailed discussion on FieldServer configuration, please refer to the FieldServer Configuration Manual. The information that follows describes how to expand upon the factory defaults provided in the configuration files included with the FieldServer (See “.csv” sample files provided with the FieldServer).
PAGE 9
FS-8700-84_Lutron_eLumen Driver Manual 1.
PAGE 10
FS-8700-84_Lutron_eLumen Driver Manual Page 7 of 36 Example // Client Side Nodes Nodes Node_Name, LUT_GRF6_0, 1.06 Node_ID, 17, Protocol, eLumen, Connection, P1, Node_type hex Client Side Map Descriptors The driver uses Map Descriptors with Lutron commands to build poll messages that will be sent to the eLumen system. Example Map Descriptors are shown in the next section.
PAGE 11
FS-8700-84_Lutron_eLumen Driver Manual 4.1.1. Page 8 of 36 FieldServer Related Map Descriptor Parameters Column Title Map_Descriptor_Name Data_Array_Name Function Name of this Map Descriptor Name of Data Array where data is to be stored in the FieldServer Data_Array_Location Starting location in Data Array Function Function of Client Map Descriptor 4.1.2.
PAGE 12
FS-8700-84_Lutron_eLumen Driver Manual Column Title Page 9 of 36 Function Legal Values Any Data Array name. If not listed under Data Arrays the driver will auto-create the Data Array. DA_Lut_List Name of Data Array that contains a list of zones or areas, etc, needed to build the poll message. DA_Lut_List_Offset The offset into the DA_Lut_List Data Array where the driver will retrieve the list data when building the poll message. 0 to the maximum offset into the DA_Lut_List Data Array.
PAGE 13
FS-8700-84_Lutron_eLumen Driver Manual Column Title Function Name of Data Array where retrieved zone names will be stored. DA_Zone_Names DA_Zone_Names_Offse t Area_Names_Start Area_Names_End Scene_Names_Start Scene_Names_End Zone_Names_Start Zone_Names_End Length 4.1.3. Page 10 of 36 The offset into the DA_Zone_Names Data Array where retrieved zone names will be stored.
PAGE 14
FS-8700-84_Lutron_eLumen Driver Manual 4.1.4. Page 11 of 36 System Monitor Command – Time Now // Client side Map Descriptors Map_Descriptors Map_Descriptor_Name, Time_now, Scan_Interval, 5s, Data_Array_Name, Time_now, Data_Array_Offset, 0, Function, rdbc, Node_Name, LUT_GRF6_0, GRAFIK_command, time_now, Length 1 Function, rdbc, Node_Name, LUT_GRF6_0, GRAFIK_command, astro_times, Length 2 Data storage in Data Array Position from offset Description: 0 Minutes from midnight 4.1.5.
PAGE 15
FS-8700-84_Lutron_eLumen Driver Manual 4.1.6. Page 12 of 36 System Monitor Command – Date // Client side Map Descriptors Map_Descriptors Map_Descriptor_Name, Date, Scan_Interval, 5s, Data storage in Data Array Position from offset 0 1 2 3 4.1.7.
PAGE 16
FS-8700-84_Lutron_eLumen Driver Manual 4.1.9. Page 13 of 36 System Monitor Command – Serial Number // Client side Map Descriptors Map_Descriptors Map_Descriptor_Name, Serial_num, Scan_Interval, 5s, Data storage in Data Array Position from offset 0 4.1.10.
PAGE 17
FS-8700-84_Lutron_eLumen Driver Manual 4.1.11.
PAGE 18
FS-8700-84_Lutron_eLumen Driver Manual 4.1.13.
PAGE 19
FS-8700-84_Lutron_eLumen Driver Manual 4.1.15.
PAGE 20
FS-8700-84_Lutron_eLumen Driver Manual 4.1.17.
PAGE 21
FS-8700-84_Lutron_eLumen Driver Manual 4.1.19. Page 18 of 36 System Control Commands containing no Parameters: – Select System Scene(s) // Client side Map Descriptors Map_Descriptors Map_Descriptor_Name, Sel_scene, Data_Array_Name, Lut_triggers, DA_Lut_List data setup Position from DA_Lut_List_Offset 0-63 4.1.20.
PAGE 22
FS-8700-84_Lutron_eLumen Driver Manual Page 19 of 36 4.1.22. System Control Commands containing no Parameters: – Re-enable timeclock with complete catchup // Client side Map Descriptors Map_Descriptors Map_Descriptor_Name, Rnbl_tck_cup, Data_Array_Name, Lut_triggers, DA_Lut_List data setup Position from DA_Lut_List_Offset 0-31 4.1.23.
PAGE 23
FS-8700-84_Lutron_eLumen Driver Manual 4.1.25. Page 20 of 36 System Control Commands containing no Parameters: Run script(s) // Client side Map Descriptors Map_Descriptors Map_Descriptor_Name, Run_script, Data_Array_Name, Lut_triggers, DA_Lut_List data setup Position from DA_Lut_List_Offset 0-63 4.1.26.
PAGE 24
FS-8700-84_Lutron_eLumen Driver Manual 4.1.27. Page 21 of 36 System Control Commands containing no Parameters: Output temp scene // Client side Map Descriptors Map_Descriptors Map_Descriptor_Name, Output_tmp_scn, Data_Array_Name, Lut_triggers, DA_Lut_List data setup Position from DA_Lut_List_Offset 0 1 2 3 4 5 6 7 ..
PAGE 25
FS-8700-84_Lutron_eLumen Driver Manual 4.1.28. Page 22 of 36 System Control Commands containing no Parameters: Select scene in area // Client side Map Descriptors Map_Descriptors Map_Descriptor_Name, Sel_scn_in_area, Data_Array_Name, Lut_triggers, DA_Lut_List data setup Position from DA_Lut_List_Offset 0 1 2 3 ..
PAGE 26
FS-8700-84_Lutron_eLumen Driver Manual 4.1.29. Page 23 of 36 System Control Commands containing no Parameters: Timeclock new schedule // Client side Map Descriptors Map_Descriptors Map_Descriptor_Name, Tck_new_sched, Data_Array_Name, Lut_triggers, DA_Lut_List data setup Position from DA_Lut_List_Offset 0 1 2 3 ..
PAGE 27
FS-8700-84_Lutron_eLumen Driver Manual 4.1.31. Page 24 of 36 System Control Commands containing no Parameters: Enable wallstation(s) // Client side Map Descriptors Map_Descriptors Map_Descriptor_Name, Enable_ws, Data_Array_Name, Lut_triggers, DA_Lut_List data setup Position from DA_Lut_List_Offset 0 1 ..
PAGE 28
FS-8700-84_Lutron_eLumen Driver Manual 4.1.33. Page 25 of 36 System Control Commands containing no Parameters: Simulate wallstation(s) switch press // Client side Map Descriptors Map_Descriptors Map_Descriptor_Name, Ws_sw_press, Data_Array_Name, Lut_triggers, DA_Lut_List data setup Position from DA_Lut_List_Offset 0 1 2 3 4 ..
PAGE 29
FS-8700-84_Lutron_eLumen Driver Manual 4.1.34. Page 26 of 36 System Control Commands containing no Parameters: Simulate wallstation(s) switch release // Client side Map Descriptors Map_Descriptors Map_Descriptor_Name, Ws_sw_rls, Data_Array_Name, Lut_triggers, DA_Lut_List data setup Position from DA_Lut_List_Offset 0 1 2 3 4 ..
PAGE 30
FS-8700-84_Lutron_eLumen Driver Manual 4.1.36. Page 27 of 36 System Control Commands Containing Parameters: Toggle zone // Client side Map Descriptors Map_Descriptors Map_Descriptor_Name, Toggle_zone, Data_Array_Name, Lut_triggers, Data_Array_Offset, 19, Function, awt, Node_Name, LUT_GRF6_0, DA_Lut_List setup Position from DA_Lut_List_Offset 0-63 Description Zone(s) to toggle DA_Lut_Parms setup Position from DA_Lut_Parms_Offset 0 Description Fade cycles 4.1.37.
PAGE 31
FS-8700-84_Lutron_eLumen Driver Manual 4.1.38.
PAGE 32
FS-8700-84_Lutron_eLumen Driver Manual 4.1.40.
PAGE 33
FS-8700-84_Lutron_eLumen Driver Manual Page 30 of 36 4.1.41.
PAGE 34
FS-8700-84_Lutron_eLumen Driver Manual 4.1.43.
PAGE 35
FS-8700-84_Lutron_eLumen Driver Manual 4.1.45.
PAGE 36
FS-8700-84_Lutron_eLumen Driver Manual 4.1.48.
PAGE 37
FS-8700-84_Lutron_eLumen Driver Manual 4.1.49. Page 34 of 36 Active read on startup: Retrieving names Warning: Only one (1) active read on startup Map Descriptor may be used. The retrieval of area, scene and zone names is done with a single active read on startup (ars ) Map Descriptor. Enter the start and end numbers for the names you want to retrieve from the eLumen.
PAGE 38
FS-8700-84_Lutron_eLumen Driver Manual Page 35 of 36 Appendix A.
PAGE 39
FS-8700-84_Lutron_eLumen Driver Manual Page 36 of 36 Appendix B. Revision History 05/10/02 06/27/02 Driver Ver. 1.00 1.00 06/28/02 1.00 08/14/02 1.00 09/23/02 1.01 12/31/02 1.02 03/18/02 08/20/03 1.03 1.03 11/07/03 1.03 Date Resp Format 10/20/04 Meg Meg 1.03 11/11/04 Meg Meg 1.04 11/12/04 Meg Meg 1.04 12/17/04 Meg Meg 1.04 1/6/05 JD 1.04 Doc. Comment Rev.