Technologies Computer Driver Instruction Manual
FS-8700-41 Simplex 4100 Driver Manual            Page 12 of 58 
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com 
Tel: (408) 262-2299 Fax: (408) 262-2296 Toll_Free: 888-509-1970  email: support@fieldserver.com 
4.  Configuring the FieldServer as a Simplex Time Recorder Company - 4100 
Computer Port Protocol Client 
For a  detailed discussion on FieldServer configuration,  please  refer  to the relevant instruction 
manual. The information that follows describes how to expand upon the factory defaults 
provided in the configuration files included with  the FieldServer  (See  “.csv”  files provided with 
the FieldServer). 
This section documents and describes the parameters necessary for configuring the FieldServer 
to communicate  with a  Simplex Time Recorder Company - 4100 Computer Port Protocol 
Server. 
The configuration file tells the FieldServer about its interfaces, and the routing of data required. 
In order to enable the FieldServer for Simplex Time Recorder Company - 4100 Computer Port 
Protocol communications, the driver independent FieldServer buffers need to be declared in the 
“Data Arrays” section, the destination device addresses need to be declared in the “Client Side 
Nodes” section, and the data required from the servers needs to be mapped in the “Client Side 
Map Descriptors” section. Details on how to do this can be found below. 
Note  that in the  tables, *  indicates  an  optional  parameter,  with  the  bold  legal value being  the 
default. 
4.1.  Data Arrays 
Section Title 
Data_Arrays 
Column Title  Function  Legal Values 
Data_Array_Name  Provide name for Data Array  Up to 15 alphanumeric characters 
Data_Format 
Provide data format. Each Data 
Array can only take on one 
format. 
FLOAT, BIT, Uint16, Sint16, 
Packed_Bit, Byte, Packed_Byte, 
Swapped_Byte 
Data_Array_Length
Number of Data Objects. Must 
be larger than the required data 
storage area. 
1-65535 
Example 
// Data Arrays     
Data_Arrays     
Data_Array_Name,  Data_Format,  Data_Array_Length 
DA_AI_01,  UInt16,  200 
DA_AO_01,  UInt16,  200 
DA_DI_01,  Bit,  200 
DA_DO_01,  Bit,  200 










