User Guide

FS-8700-31 Siemens TIWAY I Page 13 of 23
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com
Tel: [phone] Fax: [phone] Toll_Free: 888-509-1970 email: [e-mail]
The above map descriptor will continuously execute the indicated host adapter command and will store the
following parameter values in the data array “HIU_Config”:
Offset Parameter
0 Dipswitch 1 and 2 settings
1 Config flag ( 0 = HIU not configured, 1 = HIU configured )
2 Option 01 configuration value
3 Option 02 configuration value
4 Option 03 configuration value
4.4.6.3. Report Adapter Configuration
Reports the Adapter Configuration option values that was used to configure the adapter.
Map_Descriptor_Name, Data_Array_Name, Data_Array_Offset, Function, Node_name, TIWAY_Host_Adapter_Cmd, Length,
C39_REP_ADAP_CONFIG, Adapter_Config, 0, RDBC, PLC_01, Report_Adapter_Config, 6,
Scan_Interval
0s
The above map descriptor will continuously execute the indicated host adapter command and will store the
following parameter values in the data array “Adapter_Config”:
Offset Parameter
0 Dipswitch 1 and 2 settings
1 Config flag ( 0 = Adapter not configured, 1 = Adapter configured )
2 Option 01 configuration value
3 Option 02 configuration value
4 Option 03 configuration value
5 Option 04 configuration value
4.4.6.4. Report Network Manager Configuration
Reports the Network Manager option values that was used to configure the network manager.
Map_Descriptor_Name, Data_Array_Name, Data_Array_Offset, Function, Node_name, TIWAY_Host_Adapter_Cmd, Length,