User Guide

FS-8700-133 Genisys Manual Page 7 of 13
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: [phone] Fax: [phone] Toll Free: [phone] email: [e-mail]
4.3 Client Side Node Descriptors
Section Title
Nodes
Column Title
Function
Legal Values
Node_Name
Provide name for Node
Up to 32
alphanumeric
characters
Node_ID
VHLC station address of physical Server Node
1-255
Protocol
Specify protocol used
Genisys
Connection
Specify which port the device is connected to the
FieldServer
P1-P8
1
Genisys_Check_Controls*
If OFF, the FieldServer configures VHLC to apply controls
from the FieldServer without verification.
If ON, the FieldServer configures VHLC to verify controls
supplied by the FieldServer before applying.
OFF, ON
Genisys_Intra_Poll_Delay*
Specify time, that FieldServer should wait before sending
ACK or Execute message after receiving the last character of
response from VHLC.
0.010s, 0.025s etc
Example
// Client Side Nodes
//
Nodes
Node_Name
,Node_ID
,Protocol
,Port
,Genisys_Check_Controls
,Genisys_Intra_Poll_Delay
Genisys_01
,1
,Genisys
,P1
,ON
,0.01s
Genisys_02
,2
,Genisys
,P1
,-
,0.01s