User Guide
FS-8700-123 MetOne Particle Counter Serial Driver Manual      Page 7 of 26 
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com 
Tel: 408 262-2299 Fax: 408-262-2269 Toll_Free: 888-509-1970 email: support@fieldServer.com 
4.  Configuring the FieldServer as a MetOne PC Serial Client 
For  a  detailed  discussion  on  FieldServer  configuration,  please  refer  to  the  FieldServer 
Configuration Manual.  The information that follows describes how to expand upon the factory 
defaults provided in the configuration files included with the FieldServer (See “.csv” sample files 
provided with the FieldServer). 
This section documents and describes the parameters necessary for configuring the FieldServer 
to communicate with a MetOne Particle Counter Serial Server. 
4.1.  Data Arrays/Descriptors 
The  configuration  file  tells  the FieldServer  about its  interfaces, and  the  routing of  data 
required.    In  order  to  enable  the  FieldServer  for  MetOne  Particle  Counter  Serial 
communications,  the  driver  independent  FieldServer  buffers  need  to  be  declared  in  the 
“Data Arrays” section, the destination  device addresses need to be declared in the “Client 
Side  Nodes”  section,  and  the  data  required from  the  Servers  needs  to be  mapped  in  the 
“Client Side Map Descriptors” section. Details on how to do this can be found below. 
Note that in the tables, * indicates an optional parameter, with the bold legal value being the 
default. 
Section Title 
Data_Arrays 
Column Title  Function  Legal Values 
Data_Array_Name  Provide name for Data Array 
Up  to  15  alphanumeric 
characters 
Data_Array_Format 
Provide  data  format.  Each  Data 
Array can only take on one format. 
Float,  Bit,  UInt16,  SInt16, 
Packed_Bit,  Byte, 
Packed_Byte, 
Swapped_Byte 
Data_Array_Length 
Number  of  Data  Objects.  Must  be 
larger than  the  data storage  area 
required by the Map Descriptors for 
the data being placed in this array. 
1-10,000 
Example 
// Data Arrays     
Data_Arrays     
Data_Array_Name,  Data_Array_Format,  Data_Array_Length 
DA_AI_01,  UInt16,  200 
DA_AO_01,  UInt16,  200 
DA_DI_01,  Bit,  200 
DA_DO_01,  Bit,  200 










