Technologies Computer Driver Instruction Manual

FS-8700-114 DeviceNet Master Manual Page 13 of 15
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: [phone] Fax: [phone] Toll Free: [phone] email: [e-mail]
always powers up in Idle mode and can be set to Run mode automatically with a preload section or
from the Server side protocol of the FieldServer. The following preload section can be placed in the
configuration file to place the scanner in Run mode at power-up:
Preloads
Data_Array_Name, Preload_Data_Format, Preload_Data_Value, Location
Command_Reg, Bit, 1, 0
Offset zero of the Status Data Array indicates the Scanner’s actual mode achieved. A non-zero value
indicates the Scanner is in Run mode and a value of zero indicates the scanner is in Idle mode.
Appendix B.3. Master Status Codes
The Master Status codes displayed on the F-screen are depicted below: