Technologies Video Game Controller User Manual
Ruinet Utility User Manual     
    Page 34 of 46 
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com 
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldserver.com
ipconfig /release * 
ipconfig /renew * 
The FieldServer checks every few minutes for the existence of other DHCP Servers and 
will disable itself if any are detected. A message on the RuiNet E screen will indicate 
when the DHCP Server has been disabled. 
2.12.  K - Change UI Display Mode 
Figure 2.20 
The Expert Mode allows viewing of the different FieldServer tiers. The Novice and Normal 
modes currently have the same functionality in that it prevents viewing the FieldServer tiers. 
NOTE:
 Normal and Expert modes are intended for the use of FieldServer personnel only. 
They provide no improved application functionality, and the added functions in these modes 
are neither documented, nor supported by FieldServer Technical Support. Consequently, it 
is strongly advised that these modes are not enabled. 
2.13. Restart FieldServer 
Figure 2.21 
Press one of these keys O, N 
or E to change to the indicated 
User Interface Display mode. 
Push the ! key to restart the FieldServer. All stats and 
message screens will be cleared and connections 
with remote devices closed. 










