Technologies Video Game Controller User Manual

Ruinet Utility User Manual
Page 19 of 46
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com
Tel: [phone] Fax: [phone] Toll_Free: 888-509-1970 email: [e-mail]
Parameter Description
RX IP not for us The number of received IP packets not meant for the FieldServer.
Max RX buffers used The maximum number of receive buffers used since restart.
Rx buffers in use The number of receive buffers currently in use.
2.4. N - Node Overview
Figure 2.6 – Node Overview Screen.
Figure 2.7 – Node Overview – Settings Aspect Page 1
Press the G key and type the node number to
view the details for a particular node.
Displays the number of errors for a node. Occasional errors may indicate noise but also
may indicate a systematic error. Refer to the FieldServer Troubleshooting Guide for more
information. This does not affect the operation of the FieldServer, drivers or
communications to remote devices.
Every attempt is made to standardize the way
in which drivers report stats but in some drivers
unavoidable differences exist.
Node number - type number to go to
detail for that node, e.g. type 02 to
navigate to detail for the node called
“MB_Node1”
Push the R key to set all statistics for all nodes to zero. This doesn’t affect
the operation of the FieldServer, drivers or communication to remote
di
To view next or previous
node, use the arrow keys.
To view Next Aspect of the node detail,
use the spacebar.
Push the M key to see a filtered list of Map
Descriptors for the node currently being
displayed.
To view more of the same aspect
use the PgDn or PgUp keys.