Technologies Video Game Controller User Manual

Ruinet Utility User Manual
Page 14 of 46
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com
Tel: [phone] Fax: [phone] Toll_Free: 888-509-1970 email: [e-mail]
Parameter Description
Cache - Created
The number of times a cache Map Descriptor containing outdated
data has been polled resulting in the creation of a new cache Map
Descriptor. See Error! Reference source not found.
Cache - Bumped
The number of expired cache blocks. See Error! Reference
source not found.
Pex Write Thru
Writes are never cached - the external device is put on hold while
the FieldServer resends the message to the PLC and waits for the
response. When the FieldServer receives the response from the
PLC it in turn responds to the external device. This operation is
counted as a PEX Write thru.
Server Response Max
The maximum time that the FieldServer has taken since the last
reset to receive a message from an external device, poll the PLC
and respond to the external device. The SCADA Hold Timeout
parameter should be set higher than this limit
Server Response Avg
This is the average time that the FieldServer has taken since the
last reset to receive a message from an external device, poll the
PLC and respond to the external device. Reconfigure if response
times are slow.
Link Control
Who-Is-Router-To-Network
I-Am-Router-To-Network
Reject-Msg-To-Network
BACnet specific – see Driver Manual.
Messages Reconstructed Metasys Specific – see Driver Manual.
Unsupported Property The driver encountered an unsupported property in a message.
Unsolicited Messages Recd A message was received without the driver polling for it.
Single Write A write data message containing a single data element.
Single Item Read A read data message requesting a single data element.
Block Write A write message containing a block of data elements.
Block Read A read message requesting a block of data elements.
Sequence Error
Messages containing sequence numbers received out of
sequence.
Data Object Startup Data requested from a node in start-up mode.
Expedite Read
Expedite Write
The number of Map Descriptors given the highest priority to
complete a read/write first.
Fasttrack Read
Fasttrack Write
The number of Map Descriptors given a higher priority to complete
a read/write as soon as possible.
Fasttrack Overrun Read
Fasttrack Overrun Write
The number of times the buffer holding fasttrack read/write Map
Descriptors overflowed.
Max Read Response Time
Min Read Response Time
Avg Read Response Time
Maximum/Minimum/Average time in seconds that passed before a
response was received to a read message sent by a driver acting
as a Client.
Max Write Response Time
Min Write Response Time
Avg Write Response Time
Maximum/Minimum/Average time in seconds that passed before a
response was received to a write message sent by a driver acting
as a client.
Max Passthru Response Time
Min Passthru Response Time
Maximum/Minimum/Average time in seconds to receive a
response to a poll sent using the Passthru mechanism.