User Guide

580 West Central Avenue Suite A
Brea, California 92821
Phone: [phone]
Fax: [phone]
www.fieldpiece.com
MADE IN CHINA
81
72641 00155
Model: SWT2
The SWT2 Water Resistant Digital Pocket
Thermometer has been designed to last long
in field use. It is fully sealed to keep moisture
out of the case and away from the sensitive
electronics inside.
Water Resistant Thermometer
 Water resistant for field testing.
 Protective sheath doubles as an extension handle.
 Probe can be inserted through duct walls.
 Ergonomic shape and easy to read LCD.
 MAX/MIN function.
 Auto-off after 10 minutes.
Features
Range: -58°F to 392°F
Accuracy: ± 3.6°F (-58°F to -4°F)
± 1.8°F (-4°F to 302°F)
± 5.4°F (302°F to 392°F)
Resolution: 0.1°F
Battery: LR44 1.5V (installed)
Do not expose thermometer to temperatures over 122°F.
Specifications
Model
SWT2
MAX/MIN function- Pressing MAX/MIN will cycle
through maximum, minimum, and current readings. To
reset memory, hold MAX/MIN for at least 3 seconds.
Battery replacement- Loosen screws of battery cover,
pull out battery holder, and replace with same type.
Protective sheath- Remove protective sheath when
taking temperatures. Snap it to the battery cover to
create a comfortable handle. Always cover the
probe when not being used. The sheath
protects you from the probe and the
probe from the toolbox.
Operator’s Guide
SWT2 blister card v03 Quark4.qxd 12/15/2004 2:50 PM Page 2