User Manual

3332
Firmware View and Update
Firmware often becomes available as new
refrigerants and features become available.
Before entering this mode, download from
www.fieldpiece.com and transfer from the
computer to the manifold via the micro USB port
on the side.
Or you can initiate an update over the air from
your mobile device running the Job Link system
mobile app while the version is displayed.
MENU/F Ware
1. View the firmware version on the top line, P/T chart on the
second line, and radio region on the bottom line.
2. If a new firmware file is found on the internal flash drive the new
versions will be shown. Choose whether or not you want to update.
3. Once installation begins you will see a bar moving across the
screen. “donE” will appear and your SMAN manifold will turn off
when finished.
• Press MENU to exit at any time before installation begins.
• During installation, buttons are disabled.
• User settings are not deleted.
• Log files are not deleted.
Restore User Settings
Restore factory default user settings when you
want a fresh start.
MENU/Restore Settings
1. Use ARROWS to select Yes or No.
2. Press ENTER to select and exit.
• Press MENU to exit at any time. If changes were made, choose
whether or not you want to save changes.
• If you choose to restore, it may take a few seconds before returning
to standard operation.