Specifications

①
②
③
④
⑤
⑥
⑦
a.
d.
b. c.
e.
SETTING
SETTING
SETTING
SETTING
6/14
3/14
7/14
8/14
ButtonFunction
EntertoHexMode
Calibrationlabel
Screensleepsetting
Automaticshutdownsetting
Click“Save”
Click“Save”
Click“Save”
Click“Save”
T
Ready
T
Ready
T
Ready
T
Ready
Hex：OFF
Calibrationlabel:OFF
Sleep:OFF
Shutdown:OFF
HoldpresstheMenutoenterthesettingmenu Switchtodensityoption Click“Set”→ →
Menu Power/Save Feed/Set
HoldpresstheMenutoenterthesettingmenu SwitchtoHEX Click“Set”→ →
HoldpresstheMenutoenterthesettingmenu Switchto Click“Set”→ thecalibrationlabel→
HoldpresstheMenutoenterthesettingmenu SwitchtoSleepoption Click“Set”→ →
HoldpresstheMenutoenterthesettingmenu Switchtoshutdownoption Click“Set”→ →
MenuOptionsDescription
1.
2.
3.
4.
5.
Installpaperstepbystep
Presstopcoverbuttontoopenthemediacover.
Insertthemediarollspindleintoamediarollandfixitinthecenterofthepapercavity
Placethemediarollspindleonthemediarollmount.
Pullout1cmmediaoutofprinterandclosethecovercorrectly.
Whenprintingiscomplete,tearthelabelpaperfromforward.
BasicButtonFunction
ProductView:
Frontview
Topview
Rearview
①LED display
②MENU
③Power/Save
④Feed / Set
⑤Strap hole
⑥USBport
⑦Top Cover Open button
Bottomview
Printerdescription:

PortableMobilePrinter
Thisproductisonlysuitableforsafeusein
non-tropicalclimateconditions.
FastInstallationGuide
•
Modelspecifications,accessories,partsandprogramcontentaresubjecttotheactualmachine,subjectto
changewithoutnotice.
After-SalesService
www.gainscha.net
400-038-0088
ScantheQRcodetodownloadthedriveror
downloaditonwebsite
(sharedfolder)
Note:
Thetransmissioninterface,appearanceoftheprinter
inthepicturewillvaryaccordingtothetypeofmodel
youpurchased.Fortheactualtransmissioninterface
andappearancepleaserefertothematerialobject.
Theequipmentcontainsmodel
approvalcodes(respectively):
CMIITID：2021DP10891，
CMIITID：2021DP11268，
CMIITID：2019DP4046，
CMIITID：2018DP1893，Different
modulesaresubjecttotheactualproducts.
ON/OFF
\ \
Operation/button Menu
Power/Save
Feed/Set
Longpress
Shortpress
double-click
Enter/Exitthemenu
Togglemenuoptions
(positive)
Togglemenuoptions
(reverse)
SavetheSettings
andexitthemenu
Notinthemenu:samelongpress
Enterthemenu:Switchoption
parameters
SavetheSettings
andexitthemenu
Notemode:Papertransfer
Labelmode:Walkalabel
SETTING
2/14
Mediatypesetting:
Click“Save”
T
Ready
Paper:Continuous
HoldpresstheMenutoenterthesettingmenu Switchto Click“Set”→ themediatype→
SETTING
1/14
Click“Save”
T
Ready
Density：1
Densitysetting
SETTING
4/14
Beepersetting
Click“Save”
T
Ready
Beeper：OFF
HoldpresstheMenutoenterthesettingmenu SwitchtoBeeperoption Click“Save”→ →
SETTING
5/14
Commandswitchingsetting
Click“Save”
T
Ready
Command:TSPL
HoldpresstheMenutoenterthesettingmenu Switchto Click“Set”→ commandoption→
WIRELESS THERMAL PRINTER