Operating instructions

FZP 6005-E
28EN
Storage | Technical data
15. STORAGE
If you do not use the saw for a period exceeding 30 days, proceed as follows.
Empty the oil container.
Remove and clean the guide bar and the chain. Immerse the guide bar and the chain in a
paraffin-based or soap-based cleaning bath.
Then dry the guide bar and the chain.
Place the chain into a container filled with oil. This will prevent it from corroding.
Slightly apply oil onto the guide bar.
Wipe the chainsaw body with a cloth. When cleaning, use a soft cloth soaked in a soap
water.
Store the chainsaw
• in higher racks or in locked premises out of the reach of children
• in a dry place
16. TECHNICAL DATA
Power 600 W
Voltage/Frequency: 230 V - 240 V / 50 Hz
Chain pitch 3/8"
Bar length 25 cm
Cutting speed 10 m/s
Total length 2,05 m -2,65 m (without guide bar)
Vibrations hand/arm, weighted root-mean-
square acceleration
< 2,5 m/s
2
Total length 2,3 m -2,9 m
Cutting length 250 mm
Weight 3,5 kg
Sound power level LWA measured 99 dB(A)/guaranteed
102 dB(A)
Container capacity 100ml
The User’s Manual is in a specific language version.