User`s manual

FVC 4001-EK / FVC 4002-EK

8EN

Maintenance and storage | Technical speciﬁ cations

If the pump is permanently installed, the working order of the switching ﬂ oat should be

checked every 3 months.

Any ﬁ brous deposits that could deposit themselves inside the pump, should be removed

using a current of water.

Mud should be cleaned from the ﬂ oor of the pumping pit every 3 months.

Remove deposits on the ﬂ oat using clean water.

Cleaning the pump impeller

If an excessive amount of debris accumulates in the body of the pump, ﬂ ush the pump out with

clean water.

6. TECHNICAL SPECIFICATIONS

FVC 4001-EK FVC 4002-EK

Voltage/Frequency 230 V ~ 50 HZ 230 V ~ 50 HZ

Power input 750W 900 W

Maximum transferred amount 12 000 l/h 14 500 l/h

Maximum delivery 8 m 10 m

Maximum submersible depth 8 m 10 m

Maximum temperature of the media 35 °C 35 °C

Maximum value of solid particles in the media Dia. 35 mm Dia. 25 mm

Height of the switching point: On Approx. 50 cm Approx. 50 cm

Height of the switching point: Turned off Approx. 5 cm Approx. 5 cm