Instruction Manual

EN
IMPACT DRILL OPERATING INSTRUCTIONS
11
Adjustment and operation | Technical specifications
Loosen the screw prior to chuck removal.
To loosen the screw, turn it in a clockwise direction.
The chuck can be equipped with all standard drills and extensions manufactured in compliance with the
business standards up to dia. 13 mm.
The power tool is fitted with the quick-release chuck to facilitate exchange of the extensions during manual
drilling without a key.
7. TECHNICAL SPECIFICATIONS
IMPACT DRILL:
Power supply 230V/50Hz
Power input 1 050W
Speed
0–1100/0–2800rpm
Protection class II
Maximum drilling diameter Ø13mm
Power supply cable length 1.8m
Declared noise level 104dB(A)
Instructions Manual - language version only.