Product Manual

Page of 14
6
SEEDING/FERTILIZING RATE ADJUSTMENT HANDLE
(Pre-installed on the top hopper case)
To adjust the fertilizer rate, you will need to adjust hand wheels (on each side of hopper). The
seed/fertilize rate depends on the seed/fertilizer you want to plant, please refer to your
seed/fertilizer supplier’s instruction to get the proper seed/fertilize rate.
Before adjusting the seed rate, return the rate to zero by rotating the hand wheel, then check and
make sure all seeding/fertilizing wheels are fully closed on all 20 seeding/fertilizing boxes. If not,
you need to loosen the clips on both sides of the seeding/fertilizing wheel and push the wheel into
the box. Tighten the clips. When the seeding/fertilizing box is closed and the meter indicates “0”.
Adjust fertilizing rate by rotating the hand wheel. The meter has 9 numbers from 0-8, from zero to
Maximum.
Part #
Description
Part #
Description
1
Hand wheel
3
Butterfly nut
2
Seeding/Fertilizing Rate Indicator
4
Plastic hold plate
Seeding/Fertilizing Rate Adjustment Handle (Figure 3)
There are 2 Regulators (Handles) on both side of the hopper
3
4
2
1