Product Manual

Page of 14
5
SEEDING/FERTILIZING ADJUSTMENT DEVICE
(Pre-installed under the top hopper case)
The seeding adjustment device is mainly composed of the seeding/fertilizing device,
seeding/fertilizing box and the seeding/fertilizing wheels. The Seeding/Fertilizing Box is attached on
the Seeding/Fertilizing Axis by two clips and the seed rate is adjustable by controlling the position of
this seed/fertilizer wheel.
Part #
Description
Part #
Description
1
Seeding/Fertilizing axis
5
Seed/Fertilizing box
2
Clip
6
Seed/Fertilizing Tongue
3
Block wheel
4
Seed/Fertilizer Wheels
1. Weight, size, relative humidity, and moisture
content can affect seeding rates. Users can adjust
the position of the seed/fertilizer tongue and lock in
3 different positions by moving the cotter pin to
meet the different seeding/fertilizing size.
(See Figure 2)
2. Frequently check each seed/fertilizing wheel
(Figure 1-Part 4) and make sure all are the same
size.
Seeding/Fertilizing Adjustment Device (Figure 1)
There are devices total pre-installed under the hopper
1
2
3
4
5
6
Cotter pins for seed/fertilizer
tongue and funnel location
Seeder/fertilizer tongue
Additional
cotter pin
holes
Figure 2