Product Manual

Page of 28
3
MAINTENANCE
• Maintain your ATV Spreader. It is recommended that the general condition of any ATV Spreader
be examined before it is used. Keep your ATV Spreader in good repair by adopting a program of
conscientious repair and maintenance. If any abnormal vibrations or noise occurs, have the
problem corrected before further use. Have necessary repairs made by qualified service personnel.
1. The hopper should be washed after use, especially after use with corrosive material such as
fertilizer, salt or ice melting compounds. When dry, oil thoroughly.
2. The gearbox is filled with lubricant and sealed at the factory. If operated and stored properly, the
gearbox will provide a long, trouble-free service life. If disassembly of the gearbox should ever be
required, it is important that the box be re-filled with a good quality grease and that the box halves
are resealed with a silicone adhesive.
3. Always store seeder/spreader in a clean, dry place.
4. Before using, check to make sure all nuts and bolts are tight.
5. Paint any bare metal or rusty spots for longer life.
WORK AREA
• Keep work area clean, free of clutter and well lit. Cluttered and dark work areas can cause
accidents
• Keep children and bystanders away while operating an ATV Spreader. Distractions can cause
you to lose control, so visitors should remain at a safe distance from the work area.
• Be alert of your surroundings. Using an ATV Spreader in confined work areas may put you
dangerously close to cutting tools and rotating parts.
PERSONAL SAFETY
• Stay alert, watch what you are doing and use common sense when using an ATV Spreader. Do
not use an ATV Spreader while you are tired or under the influence of drugs, alcohol or medication.
A moment of inattention while operating an ATV Spreader may result in serious personal injury.
• Dress properly. Do not wear loose clothing, dangling objects, or jewelry. Keep your hair, clothing
and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving
parts.
• Use safety apparel and equipment. Use safety goggles or safety glasses with side shields which
comply with current national standards, or when needed, a face shield. Use a dust mask if working
in dusty work conditions.. This applies to all persons in the work area. Also use non-skid safety
shoes, hardhat, gloves, dust collection systems, and hearing protection when appropriate.