Product Manual

Page of 28
21
Step 15
Adjustable
Plate(down)
R Pin Ø2
2. Install Adj Handle onto the
fixed pins using one of the 3
holes on the adj handle. See
below. Install with R pin and
washer.
Fix Pin
1. Assemble the Adjust Plate
(down) to the Adjustable
Handle (low) with the hex bolt
5/16” x 3/4” and Nylon Nut
5/16”.
When using this hole,
material will flow out of both
openings in the adjustable
plates.
When using one of the outer
holes, material will only flow out
of out one or the other openings
in the adjustable plates.