Product Manual

Page of 28

Step 14

Cotter Pin Ø2x20

2. Insert the Connecting

Rod into the holes in

The Adjustable Plate

And control Lever,

install washer and pins.

Moving the Adjustable control

lever up shuts the spreader off.

Moving the adjustable control

lever down allows spreader

plates to open up to spread

material.

“R” pin Ø2

Wing Nut Ass’y

2. Insert the Connecting Rod into

the holes in the Adjustable Plate

and Control Lever, install washers

and cotter pins.

Nylon Nut 3/8”

Flat Washer Ø10

Cotter Pin 3/32” x 3/4”

Moving the Adjustable Control Lever up shuts the spreader off.

Moving the Adjustable Control Lever down allows spreader plates

to open up to spread material.

Spring

1. Insert the Adjustable Handle into the

slot according to the picture. Then

install bolts, nuts and washers, tighten

until handle is tight but can still be

moved forward and back. Handle

should have some resistance.

Flat Washer

Ø10

Index

Hex Bolt Flat Washer

3/8” x 2-1/2” 3/8”

Washer

Adjustable Plate

(top)

Flat Washer

3/8’

Lock Plate

Cotter Pin

3/32” x 3/4”