Product Manual

Page of 11

Step 2: Attach the Center Connecting Collar (#12) to the Crossbar B (#16) at hole

position H using the Hex Bolt M8 x 50 (#11) and Lock Nut M8 (# 6). Attach the Spring

Tines to the Crossbar B at position F, G, I, J and K using Carriage Bolts M10 x 60 (#9)

and Lock Nuts M10 (#10). Attach the Outside Connecting Collar (#4) between position

A and B using Flat Washers (#3) and Cotter Pins (#2) on each side of the Outside

Connecting Collar; attach another Outside Connecting Collar (#4) between position C

and D in the same way. Attach the Spring Tines to the Crossbar B at position E using

Carriage Bolts M10 x 60 (#9) and Lock Nuts M10 (#10).

Note: Position Crossbar B so the B marking on the Crossbar B is near position E

side, standing behind drag facing direction of travel, marking would be on the left

side.