ATV Adjustable Drag Harrow OWNER’S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing this product! For future reference, please complete the owner’s record below: Model: _____FTF-0424M______ Purchase Date: _______________ Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product before you begin using it. This machine is designed for certain applications only. The manufacturer cannot be responsible for issues arising from modification.
WORK AREA • Keep work area clean, free of clutter and well lit. Cluttered and dark work areas can cause accidents. • Keep children and bystanders away while operating a drag harrow. Distractions can cause you to lose control, so visitors should remain at a safe distance from the work area.
ASSEMBLY Remove and identify loose parts from carton and bag.
Step 1: Attach the Center Connecting Collar (#12) to the Crossbar A (#14) at hole position H using the Hex Bolt M8 x 50 (#11) and Lock Nut M8 (# 6). Attach the Spring Tines to the Crossbar A at position F, G, J and K using Carriage Bolts M10 x 60 (#9) and Lock Nuts M10 (#10).
Step 2: Attach the Center Connecting Collar (#12) to the Crossbar B (#16) at hole position H using the Hex Bolt M8 x 50 (#11) and Lock Nut M8 (# 6). Attach the Spring Tines to the Crossbar B at position F, G, I, J and K using Carriage Bolts M10 x 60 (#9) and Lock Nuts M10 (#10).
Step 3: Attach the Center Connecting Collar (#12) to the Crossbar C (#17) at hole position H using the Hex Bolt M8 x 50 (#11) and Lock Nut M8 (# 6). Attach the Spring Tines to the Crossbar C at position F, H, I, and J using Carriage Bolts M10 x 60 (#9) and Lock Nuts M10 (#10).
Step 5: Attach the Center Bottom Connecting Bar B (#19) under Crossbars A, B, C and D. Attach it to each Center Connecting Collars (#12) on each of the Crossbars using Hex Bolts M8 x 25 (#5) and Lock Nuts M8 (#6). Attach the Handle (#15) to the Center Connecting Bar B (#19) using Hex Bolt M8 x 30 (#20) and Lock Nut M8 (#6). Install Center Top Connecting Bar C (#13) to the top side of each Center Connecting Collars (#12) on each of the Crossbars using Hex Bolts M8 x 25 (#5) and Lock Nuts M8 (#6).
General Assembly Image MAINTENANCE • Maintain your drag harrow. It is recommended that the general condition of any drag harrow be examined before it is used. Keep your drag harrow in good repair by adopting a program of conscientious repair and maintenance. If any abnormal vibrations or noise occurs, have the problem corrected before further use. Have necessary repairs made by qualified service personnel.
DIAGRAM & PARTS LIST PART # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 DESC Chain Cotter Pin Ø4×65 Flat Washer Ø44×Ø32.5×2.
WARRANTY One-year limited warranty TG PO BOX 202 Hopkins, MN 55343 Made in CHINA Page 11of 11
