Manualshelf

Overview of Primary Product

ManualsBrandsField Controls ManualsBoiler Venting4" Intake Air Hood
12345678
page 3
Now put the oil pump and the AirBoot™ kit coupling back into place. Replace the two 7.
1
⁄4" oil pump
mounting screws. Tighten the screws.
Reconnect the burner oil line to the ell fitting on the oil pump per Figure 1, drawings E and F. 8.
Mount the VRV tee assembly or 90° elbow onto the Air Boot™ intake. Fasten using three (3) sheet metal 9.
screws on all joints. (See Figure 5)
Figure 4
Figure 5