Submittal Sheet

Page 2 of 2
P/N 780500200 09/18 Rev C
ENGINEERING DATA FAD
PRODUCT SPECIFICATIONS
Housing Material: 22 gage stainless steel
Seal Material: 1/16” cross-linked polyethylene
Voltage 18-30 VAC, 24VAC nominal
Maximum Operating Current 0.1 Amps
Power Draw Requirement 3W at 24 VAC when opening
or closing
Timing: 15 seconds Power open, 15 seconds Power close
Operating Ambient Temperature Range -20°F to 150°F
(0°C to 60°C)
Operating Humidity Range 5 to 90% RH (non‐condens-
ing)
Shipping Temperature Range ‐20°F to 160°F (‐29°C to
71°C)
Recommended Max Velocity: 1000 ft/min
Recommended Max Pressure Di erential: 1.0” wc
Leakage: under 0.5% at 0.5” wc
Mounting Restrictions: None, recommended motor at
12:00 if horizontal
PROJECT INFORMATION
DAMPER SIZING INFORMATION
FAD DAMPER CONTROL WIRING
Field Controls
2630 Airport Road
Kinston, NC 28504
Customer Service: 252 522-3031
Fax: [phone]
Visit us at: www. eldcontrols.com
780500200 FAD Submittal Sheet Rev C 09-18.indd 2 9/25/2018 3:53:37 PM