User Guide

Maintenance & Disassembly
FIC MD02 Service Manual 5-9
Figure 5-8 Removing the three screws on the bottom case
2. To remove the two screws and two hex-bolds of rear side for the system unit.
Figure 5-9 Two Screws and two hex-bolds
3. Removing the two screws of LCD connector and one LCD cable.
Figure 5-10 Two Screws and one LCD cable
2. Slowly pullout the LCD panel from the system unit.
PDF created with FinePrint pdfFactory trial version http://www.fineprint.com