User Guide

Outline of the MD02
1-24 FIC MD02 Service Manual
3.
On the DOS prompt, type the following command.
A:\>Phlash XXXXXX.ROM (BIOS filename)
or
A:\>XXXXXX.BAT (Batch file for BIOS file)
4. Press <Enter> to run this BIOS utility. After the system has been successfully
run this program, a message similar to the following appears:
Flash memory has been successfully programmed, press any key to restart
the system. If the system does not restart, turn it off, then turn on again.
5. Press any key to restart this system.
Contact your dealer for the latest BIOS update file.
PDF created with FinePrint pdfFactory trial version http://www.fineprint.com