User Guide

Outline of the MD02
FIC MD02 Service Manual 1-21
1.6.5 Security Menu Setup
PhoenixBIOS Setup Utility
Main Advanced Security Boo Exit
Item Specific
Help
Set Supervisor P
assword
[Enter]
Supervisor
Set User Password [Enter] controls access
setup utility.
Password on boot [Disabled]
Fixed disk boot sector [Normal]
Diskette access [Supervisor]
F1 Help
á â
Select
Item
-/+ Change
Values
F9 Setup
Defaults
Es
c
Exit
ßà
Select
Menu
Enter Select 4Sub-
Menu
F1
0
Save and
Exit
• Set Supervisor Password
Supervisor password gives you the authority in accessing the setup utility.
You also need to enter this password in system booting and resuming from
suspend mode. When you press <
Enter
> in this field, the Set Supervisor
Password dialog box appears. Enter a new password with up to 8 alpha-
numeric characters, and then re-enter it for confirmation.
• Set User Password
This field is only available when Supervisor Password has set. Enter the user
password when boot the system or resume from suspend mode. But if the
Write Protect is set in the Fixed disk boot sector field, you should enter a
supervisor password to access the fixed disk when boot the system or
resume from suspend mode.
• Password on Boot
If you set this field to Enabled, your computer will always ask for the
password every time you boot your computer.
• Fixed Disk Boot Sector
If you set this field to Write Protect, the write protect boot sector on hard disk
will protect against viruses. In this situation, only the supervisor can access
the Boot Sector of fixed disk.
• Diskette Access
If you set this field to Supervisor, only the supervisor can access to the
diskette drives. If you set to User, both the supervisor and user can access to
the diskette drives.
PDF created with FinePrint pdfFactory trial version http://www.fineprint.com