User Guide

Installation and Upgrade
2-4 FIC MD02 Service Manual
1. Boot Windows from your hard disk and insert the disc containing the Modem
driver for Windows.
2. Click the Start button and then click Run. In the Run dialog box, click Browse
button and navigate to the directory as "\driver\Win2000\MODEM\setup.exe"
where the modem driver is located. . Please change "
Win2000
" to other path
named as WinXP… to fit the operating system you are using.
3. Click OK to process the installation of modem driver. Follow the instruction to
finish the installation.
4. With
“Yes, I want to restart my computer now”
selected, click
Finish
to
complete the modem installation.
2.2.6 Installing Internal LAN Device Driver
Your notebook computer may come with an optional internal LAN, which uses the
Intel 82559 chip. Please follow the procedures below for installing the LAN driver:
Installing Internal LAN for Windows 2000
1. Boot Windows 2000 from your hard disk and insert the disc containing the LAN
driver for Windows 2000.
2. Click the Start button, then click Settings, and Control Panel. Double click
System and click Device Manager tab. Under Other Devices, you'll see PCI
Ethernet Controller. Select it and click Remove button.
3. Click Refresh button. The Add New Hardware Wizard will detect PCI Ethernet
Controller. Click
Next
to search for the driver.
4. Click Next to continue.
5. Tick Specify a location and click Browse button. Then, navigate to
"\Drivers\Win2000\LAN" and click Next.
6. Click Next to accept the updated driver for Intel 82562EZ Fast Ethernet LAN
driver.
7. Click Next to continue with LAN driver installation.
8. Insert the disk labeled "
Windows 2000 Second Edition CD-ROM
", and then
click OK.
9. Type "\Win2000", then click "OK".
10. Click Finish to complete installation.
11. Restart Computer to finish setting up LAN.
Installing Internal LAN for Windows XP
1. Click the Start button, then point to Settings, and click Control Panel.
2. Double-click on the System icon, Hardware and then click on the Device
Manager
folder tab.
3. Under the Other Devices line, you will find the Ethernet Controller, click
Uninstall, OK, then Scan for hardware changes buttons to appear the New
Hardware Found Message Box.
4. In the Found New Hardware Wizard message box which shows searching
Ethernet Controller driver. Click Next to proceed to the next step.
5. Select "Search for a suitable driver for my device", and click Next.
6. Tick on
"Specify a location box"
. Then, click
Next
and
Browse
buttons and
navigate to the LAN driver location as "\Drivers\WinXP\LAN". Click OK and
PDF created with FinePrint pdfFactory trial version http://www.fineprint.com