User Guide

Installation and Upgrade
2-2 FIC MD02 Service Manual
priority of boot device. Use arrow key to select "ATAPI CD-ROM Drive", and then use
"+" or "-" to move it to the top. Go to Exit menu and select “Exit Saving Changes”.
2.2.2 Installing the VGA Device Driver
Your notebook computer uses the high-performance VGA controller, which is an
AGP 4x video local bus, 2D/3D Graphic Engine. Following is the procedure for
installing the VGA Driver for Windows 2000 and Windows XP :
Installing VGA Driver for Windows 2000
1. Boot Windows 2000 from your hard disk and insert the disc containing the VGA
driver for Windows 2000.
2. Click the Start button, then click Settings, and Control Panel. Double click
System and click Device Manager tab. Under Display Adapters, you'll see
Standard PCI Graphics Adapter (VGA). Select it and double click it.
3. Choose
Driver
button and then click
Update Driver, Next,
and
Next
again to
search for the driver.
4. Tick Specify a location and click Browse button. Then, navigate to
"\Drivers\Win2000\VGA" and click Next.
5. Click Next to accept the updated driver for S3 Graphice Twister driver.
6. Click Next to continue with VGA driver installation.
7. Click
Finish
to complete installation.
8. Restart Computer to finish setting up VGA.
Installing VGA Driver for Windows XP
1. Click the Start button, then point to Settings, and click Control Panel.
2. Double-click on the System icon, Hardware, and then click on the Device
Manager folder tab.
3. Under the Other Devices line, you will find the Video Controller (VGA
compatible), click Uninstall, OK, and then Scan for Hardware Changes
buttons to appear the New Hardware Found Message Box.
4. In the Found New Hardware Wizard message box which shows searching
Video
Controller (VGA compatible) driver. Click Next to proceed the further step.
5. Select "Search for a suitable driver for my device", and click Next.
6. Tick on "Specify a location box", then, click Next and Browse buttons, and
then navigate to the VGA driver location as "\Drivers\ WinXP\VGA".
7. Click OK and Next to begin searching the driver. The Add New Hardware will
found
S3 Graphice Twister.
8. Click
Next
to continue installing the driver.
1. Click Finish button to finish installing VGA driver and Click Yes to restart the
computer.
2.2.3 Installing the Audio Device Driver
Your notebook computer uses ALC201A Audio controller.
Installing Audio Driver for Windows 2000
1. Boot Windows 2000 from your hard disk and insert the disc containing the Audio
driver for Windows 2000.
2. Click Start, Settings, and Control Panel. Double click System and click Device
Manager tab. Under Other Devices, you'll see PCI Multimedia Audio Device.
PDF created with FinePrint pdfFactory trial version http://www.fineprint.com