User Guide

Software Functional Overview
3-8 FIC MD02 Service Manual
IDSEL Pin PCI Device
Device Number Function
Number
Device Name
AD23 Device 07 Function 0 RICOH Card Bus
Function 1 RICOH IEEE1394
AD17 Device 01 Function 0 MINI PCI
The table below summarizes the INT Pin Allocation:
INT Pin PCI Device
INTA CardBus/MiniPCI/LAN
INTB Cardbus/MiniPCI
INTC
INTD
The table below summarizes the PCI bus master Allocation:
Arbiter Signal
Agents
(Master)
Function Use
REQ00/GNT00
REQ10/GNT10 RICOH Card Bus Controller
REQ20/GNT20
REQ30/GNT30
3.3.12 SMBus Devices
The SMBus is a two-wire interface through which the system can communicate
with power-related chips. The BIOS should initialize the SMBus devices during
POST.
ICH4 SMBus Connection Devices
SMBus Device Host/Slave Address BIOS Need to Initialization
SO-DIMM Slave A0h/A2h Memory Auto Sizing (SPD).
CY28346
CLK Generator
Slave D2h Program the desired clock frequency
(Pin23 output 24MHz, Pin22 output
48MHz)
PMU 08 SMBus Connection Devices
SMBus Device Host/Slave Addres
s
A7 ~
A1
BIOS Need to Initialization
PMU08 Master 10h Enable PS01 decode interface
MAX6690 (Thermal
sensor)
Slave 9Ch Program the desired temperature
range
Battery (1
st
Battery) Slave A8h No Need
PDF created with FinePrint pdfFactory trial version http://www.fineprint.com