User Guide

Software Functional Overview
FIC MD02 Service Manual 3-5
134h 320 x 200 32-bit Packed 72
2MB
13Bh* 1400 x 1050 8-bit Packed 60, 75
2MB
13Ch* 1400 x 1050 16-bit Packed 60, 75
4MB
13Eh* 1400 x 1050 32-bitUnpacked 60, 75
8MB
141h 400 x 300 8-bit Packed 72
2MB
143h 400 x 300 16-bit Packed 72
2MB
144h 400 x 300 32-bitUnpacked 72
2MB
151h 512 x 384 8-bit Packed 70
2MB
153h 512 x 384 16-bit Packed 70
2MB
154h 512 x 384 32-bitUnpacked 70
2MB
171h 720 x 480 8-bit Packed 75
2MB
173h 720 x 480 16-bit Packed 75
2MB
174h 720 x 480 24-bit Packed 75
2MB
175h 720 x 480 32-bitUnpacked 75
2MB
176h 720 x 576 8-bit Packed 75
2MB
178h 720 x 576 16-bit Packed 75
2MB
179h 720 x 576 24-bit Packed 75
2MB
17Ah 720 x 576 32-bitUnpacked 75
2MB
Note: “*” The modes may not be available. Their availability should be determined by VESA
function calls.
Panel Type Initialization
The VGA BIOS will issue INT 15h function call during POST. This function call allows
the system BIOS to specify the panel type to the VGA BIOS. The system BIOS should
get the panel type from GPIO pins before the VGA chip initialized, and pass this
information to VGA BIOS through INT 15 Function 4E00h.
LCD Panel ID pin Definition:
VT82C686B GPI Pins
GPI [23]
GPI
[17]
GPI
[11]
GPI
[10]
Panel Type
0 0 0 0
0 0 0 1
ID0
0 0 1 0
ID1
0 0 1 1
0 1 0 0
ID2
0 1 0 1
0 1 1 0
0 1 1 1
1 0 0 0
ID3
1 0 0 1
1 0 1 0
1 0 1 1
1 1 0 0
PDF created with FinePrint pdfFactory trial version http://www.fineprint.com