User Guide

Software Functional Overview
FIC MD02 Service Manual 3-3
3.3.2 System Memory
The system memory consists of SDRAM memory on 64-bit bus and the module size options
are 128/256/512/1GMB upward. The BIOS will automatically detect the amount of memory in
the system and configure CMOS accordingly during the POST (Power-On Self Test) process.
This must be done in a way that requires no user interaction.
Base SO-DIMM DRAM slot Expansion SO-DIMM DRAM
slot
Total Size
(Bank 0&1) (Bank 2&3)
128MB NIL 128MB
128MB 128MB 256MB
128MB 256MB 384MB
128MB 512MB 640MB
128MB 1GB 1128MB
256MB NIL 256MB
256MB 128MB 384MB
256MB 256MB 512MB
256MB 512MB 768MB
256MB 1GB 1256MB
512MB NIL 512MB
512MB 128MB 640MB
512MB 256MB 768MB
512MB 512MB 1GB
1GB 1GB 2GB
3.3.3 Video
The Video subsystem used External DDR memory of Video memory. The system will
support the true ZV port, the Microsoft Direct 3D assist, simultaneous display, monitor
sense for auto display on boot and VESA Super VGA function call.
Supported Video Mode
The following is the display modes supported by the Intel Mobility Video control in
LCD only, CRT only, and simultaneous mode. The VGA BIOS will allow mode sets of
resolutions greater than the panel size but only show as much mode display as will fit
on the panel.
Supported standard VGA modes:
The VGA BIOS supports the IBM VGA Standard 7-bit VGA modes numbers.
Mode Pixel Resolution Colors Memory
00h/01h 40*25 16 Text
02h/03h 80*25 16 Text
04h/05h 320*200 4 2-bit Planar
06h 640*200 2 1-bit Planar
07h 80*25 Mono Text
0Dh 320*200 16 4-bit Planar
PDF created with FinePrint pdfFactory trial version http://www.fineprint.com