User Guide

FIC MB05W Service Manual
1- 44 FIC MB05 Service Manual
• Support for 3.3v, 5v and 12v (flash programming) cards
3.3.8 LED Indicator
The table below lists down the functions of the Status LED indicator:
Indicator Function Description
HDD/CD accessing
LED
This LED will turn on while accessing the IDE Device.
Battery Charging LED Turn on (Green) – Battery is under charging mode
Turn off – Battery full charged or no battery
CapsLock LED This LED will turn on when the function of CapsLock is active.
Wireless LAN LED When LED in green light indicates that the system is accessing data
from or is retrieving data by wireless LAN.
NumLock LED This LED will turn on when the function of NumLock is active.
Power Status LED Green – System is powered on.
Green Blinking- System is entered suspend mode.
3.3.9 Hot Keys Definition
All Hot keys must be active at all times under all operation systems.
Function Function Handler
Fn + F3 Mute (Speaker ON/OFF) BIOS Handler
Fn + F4 Suspend Control by OSPM
Fn + F7 Display toggle (CRT/LCD) BIOS Handler
Fn + F8 Brightness Increase Controlled by PMU08
Fn + F9 Brightness Decrease Controlled by PMU08
Internet
Button
Internet Function Key Controlled by Driver
Mail Button Mail Function Key Controlled by Driver
Wireless Lan Turn ON/OFF Wireless LAN Control by Hardware
3.3.10 Plug & Play
The BIOS supports the Plug and Play Specification 1.0A. (Include ESCD)
This section describes the device management. The system board devices and its resources
are as follows:
Device Connect
Type
Resources
I/O IRQ DMA Memory
DMA Controller Static 00~0F, 81~91,
93-9F,C0-DF
- DMA4 -
Interrupt Controller Static 20~21, A0~A1 IRQ2 - -
System Timer Static 40~43 IRQ0 - -
RTC Static 70~71 IRQ8 - -
ISAPNP Read Data
Port
Static 274-277,279,
A79,
- - -
System Speaker Static 61 - - -
PCI Bus Static 0-CF7,D00-FFFF - - A0000-BFFFF,
D0000-D7FFF,
PDF created with FinePrint pdfFactory trial version http://www.fineprint.com