User Guide

FIC MB05W Service Manual
FIC MB05 Service Manual 1-21
Enabled, you need to set the parameter of Base I/O address and IRQ for this
port.
1.6.4 Security Menu Setup
Phoenix BIOS Setup Utility
Main Advanced Security Boot Exit
Item Specific Help
Supervisor Password Is Clear
Supervisor Password
User Password Is Clear
controls access to the
Set Supervisor Password [Enter]
setup utility.
Set User Password [Enter]
Set Primary Hard Disk Password [Enter]
HDD Password Status Clear
Password on boot [Disabled]
I/O Security
Modem: [Enabled]
LAN: [Enabled]
1394/CARDBUS: [Enabled]
USB: [Enabled]
Wireless LAN: [Enabled]
F1 Help
á â
Select Item -/+ Change Values F9 Setup Defaults
Esc Exit ß--> Select Menu Enter Select 4Sub-Menu F10 Save and Exit
• Supervisor Password Is
This field will show Set or Clear that means whether this notebook is
controlled by Supervisor Password or not.
• User Password Is
This field will show Set or Clear that means whether this notebook is
controlled by User Password or not.
• Set Supervisor Password
Supervisor password gives you the authority in accessing the setup utility.
You also need to enter this password in system booting and resuming from
suspend mode. When you press <Enter> in this field, the Set Supervisor
Password dialog box appears. Enter a new password with up to 8 alpha-
numeric characters, and then re-enter it for confirmation.
PDF created with FinePrint pdfFactory trial version http://www.fineprint.com