User Guide

Outline of the MB02
FIC MB02 Service Manual 1-19
• Infrared port
You can select the Enabled, Disabled, or Auto option for enabled or disabled
the port, or automatically sensed by BIOS or OS. If you select Enable, you
also need to set the IR mode, Base I/O and IRQ for the IR device.
• Mode
This field is for information only as the BIOS displays the IR device type of
this notebook.
• Parallel port
Allows you to select the Enabled, Disabled, or Auto option for enabled or
disabled this port, or automatically sensed by BIOS or OS. If you select
Enable, you also need to set the parameter of Base I/O address.
• Mode
Allows you to select a parallel mode as Uni-directional, EPP or ECP when
the parallel port is configured.
• Floppy disk controller
This field is for information only as the BIOS displays the floppy disk
controller of this notebook.
PDF created with FinePrint pdfFactory trial version http://www.fineprint.com