User Guide

Installation and Upgrade
2-12 FIC M785 Service Manual
1. Find out the built-in hard disk secured with two screw at the right corner of the hard disk.
Remove this screw and carefully pull the hard disk module from the connector.
4 Screws
Figure 2-16 Remove Four Screw Securing HDD
2. Remove four screws of frame HDD bracket plate. Two small ones of them are at the front
side, and others are at the both sides
4 screws
Figure 2-17 Screws Locations of the frame HDD bracket plate
PDF created with FinePrint pdfFactory Pro trial version http://www.pdffactory.com